PB Panel Board Mounts
PB Panel Board Isolators are used to resiliently mount cabinets or boards to a wall. They are designed to accept a shear loading and isolate the fixing at the same time.
The Panel board isolator consists of 3 resilient parts. One neoprene ring is placed behind the equipment to be mounts. The bushing then goes through a hole in the equipment and the second neoprene ring is placed over the bushing. The whole assembly is then clamped together with a suitable fixing.
The bushing is supplied with steel inner and outer sleeves to prevent the equipment, and the fixing bolt cutting into the neoprene, and over tightening of the bolt.
The Data Sheet PDF's have technical information on dimensions, loads, installation and more. These can be found at the top of the grey bar to your right.
Super W Pad
Super W Pads PDFView Datasheet
75mm Super W PadView Datasheet
Rubber Mounts & Pads
HG Grommets Bolt Isolation Bushings
HG Grommets PDFView Datasheet
Mini Super W Pad
Mini Super W PDFView Datasheet